Bath Tub Reglazing Made Easy
Think that your bathtub is in dire need of replacement but don’t want to waste your entire weekend doing this tedious and boring job? If the answer is in the affirmative then tub reglazing is just the right option for you. This will not take you more then 4 to 5 hours and your bath tub will be as good as new.
You may be wondering if you can do the daunting task of reglazing all by yourself. The answer is, you definitely will if you take care of a few things. The first thing that you have to remember while reglazing is your own safety. This can prove to be fatal if all thecorrect protective measures are not taken. You should cover every possible part if your body as the chemicals used in the process is toxic. It is advisable that you do the work in an open area.
You are now armed for tub resurfacing The first step is to clean your tub thoroughly You should clean remove the gasket and the caulk when you rinse the tub. You can see a wide range of chemicals in the bath refinishing kit. Out of all the chemicals the first and the second are for the purpose of cleaning. You will use the first chemical to scrub th face of the tub and with the second solution you can make the surface sore and rough.
You have to then make sure that the surface is absolute oil free otherwise the primer will not be effective. The third solution that comes with the kit is basically used to remove all the leftover sediment. Now your bathtub is ready for the primer. You should use hand towels while applying the reducer. After about thirty minutes clean the surface with primer reducer and then let it stand to dry. You must ensure that the surface is completely dry before getting in the next stage.
Next you have to cover the portion where tub refinishing is not required . You should carefully cover those areas with paper tape and check the seal. Ensuring the safety procedure is a must in these circumstances. Now you can put base coat onto the remaining area. Keep in mind that ventilation is very important during this process and if possible you should use a respirator. Mix the primer’s solution according to the manufacturer’s guide. Following the instructions given the guide is of prime importance and should not be neglected at all. After ensuring that you can start applying the base coat with a spray gun
You are nearly done with refinishing. Your next job is to color your tub. Here you can let your imagination run wild and you can also opt for prints. However follow the instructions carefully while mixing the painttogether for the topcoat. Apply the topcoat after thirty minutes have passed from the time of applying the primer. You can use a sprat gun to apply the topcoat. You are completely done now. Wait for at least 72 hours before you step into your all new reglazed bath tub.
Toby Rutherford is a accepted expert on Bathtub reglazing. To find all your queries responded regarding resurfacing tub visit his blog on tub refinishing ^(http://www.tubreglazing.org/tub-liners/remodeling-bath-tubs-with-tub-liners/).
Bath Tub Reglazing Made Easy By house | July 22, 2010
Related Posts on Topics Home Improvement :
- » Boys Rooms Interior Design Creative Ideas
- » Great Entrance Gates Create A Sense Of Harmony In Your House
- » Carpet Cleaning Equipment For Us
- » Having To Do With Waste Water
- » Glass Lamps. Interesting Things To Keep In Mind.
Comments
« ADT Alarm Systems Dos And Don’ts | Home | Stock Market Problems. What They Are? »
