Installing Solar Panels : The Basics Explained

Installing Solar Panels : The Basics Explained:

In this age of climate change, there’s a growing drive for energy efficiency and alternative power solutions. A great way for homeowners to do their bit for the environment (and even save some money in the long run) is by installing solar panels on their home. If you’re thinking about doing this, you’ll need to make sure you have the tools for the job, including: mounts, the panels, a conduit, tape measure, laser sight, drill, stud finder, bolts and rails. Check your specific panels in case you need any extras.

With all your equipment sorted, it’s time to turn your attention to your house. Get advice from the Department of Energy on how to carry out an energy audit as this is essential before any installation. It will tell you how much you’ll save as well as how many solar panels the roof of your house can support. Then do some pruning to make sure the panels won’t be blocked by shade or low-hanging branches as this can stop them working properly.

The mounts are the first thing you should install and they need to be placed over your house’s rafters, as these will support the solar panels once they’re in place. Using a stud finder, locate the position of the rafters. Then use a laser sight to determine the precise placement of your mounts. Then drill holes for the mounts using a pilot bit, which should help to protect the rafters. Next, attach the mounts to the roof using lag bolts.

Your next job is to use bolts and attach the rails to the mounts. Then it’s time to individually install the solar panels on the rails, carefully securing them in place before moving onto the next one. The final job is to attach a conduit, running it from the converter in your house and then connecting it to the solar panels. Secure it properly so you don’t have to worry about it moving or being damaged in bad whether. Lastly, check to see your new panels work properly.

As you can see, it’s relatively straightforward to install solar panels on your home, but if you’re doing it yourself, you should always get an expert to check before and after to make sure they meet all necessary regulations and are secure. You should also check with your local electricity provider before installing them to make them aware as some of them require their own technician to be present at the installation or might let you sell power back to them. Finally, always take care when working on the roof.

Now Try – Solar Install ^(http://www.solarinstall.co.uk/)


Installing Solar Panels : The Basics Explained By house | December 21, 2010

Related Posts on Topics Home Improvement :

No Comments »

Comments

10 Recent Posts:

  • Categories:



  • Get AMnom.com updates, enter your email address:

    Delivered by FeedBurner